1/4″ Bsp Nozzles
Our 1/4 Jetter nozzles are ideal for those difficult to reach areas measuring only 18mm at the widest point.
These nozzles will blast into blockages in smaller diameter pipes and drains using less water than larger jets. Available in three or four back configuration and with or without a front jet depending on your needs and operating on as low as 10 l/min no job is to small any more. Three back version is ideal for lower flow rate machines while still giving good traction and cutting if you need extra pulling power then choose one without a front jet this way all the force is pushing the nozzle forward. The four back will give better cleaning and leave less streaks on the pipe wall, but needs a higher flow rate, if used without a front jet to give that little bit extra pulling power.